Archive for the ‘Category1’ Category

« Previous Entries
Next Entries »

Jaw Crushers | jaw breaker | crushing mill | crushing appliance | crushing press | crushing roll | ballast crusher

Tuesday, September 16th, 2008

Jaw Crushers | jaw breaker | crushing mill | crushing appliance | crushing press | crushing roll | ballast crusher

Reliable Minyu Jaw Crushers jaw breaker

?? Jaw Crushers.china Jaw Crushers have been widely used in various quarry aggregate applications worldwide for the past three decades. There are generally two types of Jaw Crushers manufactured by hnzj. The MS type comes with large feed openings and longer jaws with bigger crusher stroked for primary crushing purposes, while the MB type with wider feed openings and smaller crushing strokes for secondary, tertiary, and recycle crushing applications. Jaw Crushers.

Features of china Jaw Crushers jaw breaker

?? Jaw Crushers . Simplicity of design and rugged construction have made hnzj Jaw Crushers ideal for crushing operations. For the most efficient and economical production, a wider range of china hnzj Jaw Crushers models is a available for you to choose from. hnzj Jaw Crushers are proven one of the most well balanced jaw crushers in the world. Jaw Crushers.

jaw breaker Jaw Crushers Oil Bearings and Labyrinth Seals
??Jaw Crushers.All hnzj Jaw Crushers are built with top quality oil bearings and seals. The lubrication goes well satisfactory, and the yields as expected. Jaw Crushers. Jaw Crushers .

jaw breaker Jaw Crushers Saftey of Single Toggle Jaw Operation

??Jaw Crushers.hnzj Jaw Crushers perform crushing operations with compressive force caused by advancing and retreating motions of a swing jaw suspended from an eccentric shaft at its upper portion and supported by a toggle plate at its lower portion. The safety toggle plate provides complete jaw protection from any uncrushable and ensures a proper nip angle is maintained. Jaw Crushers . Jaw Crushers

jaw breaker aw Crushers Electric Hydraulic Adustment

Jaw Crushers.hnzj Jaw Crushers are equipped with hydraulic shim adjusters including hydraulic oil jacks, shim plates and other components. Changeovers of jaw discharge openings are easy and fast, downtime is minimized, and the production requirements are accurately met. Jaw Crushers. Jaw Crushers .

Jaw Crushers Large Crushing Ratio Production

Jaw Crushers.Since hnzj Jaw Crushers have larger and deeper crushing chambers and the crushing angle is designed to be sharp, a very high crushing ratio can be achieved. In some cases, a single toggle crusher can render both coarse and medium or medium and fine crushing quality. Jaw Crushers. Jaw Crushers .

MS Type Single Toggle Jaw Crushers jaw breaker

Jaw Crushers . With larger feed openings and bigger crushing strokes, the hnzj MS type Jaws are suitable for crushing big size lumps in large quantity. they are especially recommended for primary and concrete recycling, river stones, tough ores, and concrete recycling, for a very ling life, From the welded steel base to the rugged eccentric shaft, the MS type Jaws are built with brute strength with quality bearings. strength with quality bearings. Jaw Crushers . Jaw Crushers.

Jaw Crushers Principal Technical Data.

Jaw Crushers

Model No.
Jaw Crushers

Size of feedpening
? mm*mm ?
Jaw Crushers

Max. Feeding edge
? mm ?
Jaw Crushers

Capacity ? t/h ?
Jaw Crushers

Power
? kw ?
Jaw Crushers

Construction Size
(mm*mm ?
Weight (excluding electric motor)
? t ?

Jaw Crushers

150×250
150×250
125
1-3
5.58
896×745
×935
0.81

Jaw Crushers

250×400
400×250
200
5-20
15
1430×1310
×1340
2.8

Jaw Crushers

400×600
600×400
350
15-50
30
1700×1732
×1653
6.5

Jaw Crushers

600 × 900
900×600
480
45-110
55
2290×2206
×2370
17

Jaw Crushers

900×1200
900×1200
750
90-220
110
3800×3166
×3045
50

Jaw Crushers

500×750
500×750
425
15-65
55
2035×1921
×2000
12

Jaw Crushers

750 × 1060
1060×750
630
105-195
90
2655×2302
×3110
29

Jaw Crushers

250 × 750
750×250
210
15-30
30
1667×1545
×1020
5

Jaw Crushers

250 × 1000
1000×250
210
15-50
30
1550×1964
×1380
7

Jaw Crushers

250 × 1200
1200×250
210
20-60
37
2192×1900
×1950
8.5

jaw breaker | Jaw Crushers | crushing mill | crushing appliance | crushing press | crushing roll | ballast crusher

jaw breaker | Jaw Crushers | crushing mill | crushing appliance | crushing press | crushing roll | ballast crusher The headquarters is located in the new high-tech developed area in Luoyang and cover 100,000m2. The company’s product lines include various series of Vibrating Feeder, Jaw Crusher, Impact Crusher, Cone Crusher, Vertical Impact Crusher, Vertical Complex Crusher, Vibrating Screen, Sand Washer & Washing Apparatus, and Movable Crushing Screening Station etc. The products can be widely used in various fields domestically and internationally such as in building water conservancy and hydroelectric power projects, in high-quality highway construction, in railway construction work, in processing various metallic and non-metallic mineral, in crushing and processing refractory material, in metallurgy and multipurpose utilization engineering and crushing metallurgical slag, etc.
The company has passed the ISO9001-2000 Standard (Quality Assurance Certificate of Quality Management System) since 1998 successively. At present the company possesses many patented techniques. Since 2006 the company has been cooperating with EARTHTECHNICA CO., LTD., Japan and manufacturing the series of ASTRO JAW Crusher and cone crusher, which apply the international leading technology.
There are many professional departments in the company such as the technical research and development centre, international trade centre, before-sale and after-sale services centre, which are ready to offer you the professional, efficient services anytime, anywhere.


Related Topics:

Posted in Category1 | 1 Comment »

PFQ Volute Strong Impact Crusher

Sunday, September 14th, 2008

PFQ Volute Strong Impact Crusher

PFQ Volute Strong Impact Crusher is a newly developed series effective impact crusher manufactured by our company. It bases on the advanced overseas model such as German, Austria and so on. It is applicable for primary, secondary and fine crushing various materials with maximum feeding less than 500mm and compression strength less than 250Mpa. It features in independent structure, easy operation, effective and economize on energy, shape of product-cube, adjustable size of discharge granularity, optional crushing process for simplification of crushing flow and cost saving. It can be widely used in the fields of water and electricity, highway, sanding and crushing, and so on.

The design of the structure has the unique volute crushing chamber and three crushing sections, P, S, and T. The rotor body is jointed by the taper sleeve without key. It has the effective wear-resisted hammer, inserted installs, inclined bearing bracket, particular jugged lining board, multi-direction opening frame, lead screw or the hydraulic opening setting, which make it convenient to replace wearing parts and overhaul.

The headquarters is located in the new high-tech developed area in Luoyang and cover 100,000m2. The company’s product lines include various series of Vibrating Feeder, Jaw Crusher, Impact Crusher, Cone Crusher, Vertical Impact Crusher, Vertical Complex Crusher, Vibrating Screen, Sand Washer & Washing Apparatus, and Movable Crushing Screening Station etc. The products can be widely used in various fields domestically and internationally such as in building water conservancy and hydroelectric power projects, in high-quality highway construction, in railway construction work, in processing various metallic and non-metallic mineral, in crushing and processing refractory material, in metallurgy and multipurpose utilization engineering and crushing metallurgical slag, etc.
The company has passed the ISO9001-2000 Standard (Quality Assurance Certificate of Quality Management System) since 1998 successively. At present the company possesses many patented techniques. Since 2006 the company has been cooperating with EARTHTECHNICA CO., LTD., Japan and manufacturing the series of ASTRO JAW Crusher and cone crusher, which apply the international leading technology.
There are many professional departments in the company such as the technical research and development centre, international trade centre, before-sale and after-sale services centre, which are ready to offer you the professional, efficient services anytime, anywhere.The headquarters is located in the new high-tech developed area in Luoyang and cover 100,000m2. The company’s product lines include various series of Vibrating Feeder, Jaw Crusher, Impact Crusher, Cone Crusher, Vertical Impact Crusher, Vertical Complex Crusher, Vibrating Screen, Sand Washer & Washing Apparatus, and Movable Crushing Screening Station etc. The products can be widely used in various fields domestically and internationally such as in building water conservancy and hydroelectric power projects, in high-quality highway construction, in railway construction work, in processing various metallic and non-metallic mineral, in crushing and processing refractory material, in metallurgy and multipurpose utilization engineering and crushing metallurgical slag, etc.
The company has passed the ISO9001-2000 Standard (Quality Assurance Certificate of Quality Management System) since 1998 successively. At present the company possesses many patented techniques. Since 2006 the company has been cooperating with EARTHTECHNICA CO., LTD., Japan and manufacturing the series of ASTRO JAW Crusher and cone crusher, which apply the international leading technology.
There are many professional departments in the company such as the technical research and development centre, international trade centre, before-sale and after-sale services centre, which are ready to offer you the professional, efficient services anytime, anywhere.
Related Topics:

Posted in Category1 | 1 Comment »

GZD Vibrating Feeder Vibrating Feeder manufactured by our company has two forms: Vibration motor and eccentric excitation. Also it has two main functions: feeding and pre-screening. They deliver materials evenly to crushing equipment.

Friday, September 12th, 2008

GZD Vibrating Feeder
Vibrating Feeder manufactured by our company has two forms: Vibration motor and eccentric excitation. Also it has two main functions: feeding and pre-screening. They deliver materials evenly to crushing equipment.

Code
Specification
Maximum Feeding?mm?
Rotate Speed?r/min?
Capability?t/h?
Motor Power?kw?
Dimension (L×W×H)?mm?
Weight?Kg?

1
GZD80×250
300
965
?100
1.5×2
2500×1100×1400
2580

2
GZD95×300
400
970
?150
3.0×2
3100×1750×1640
3360

3
GZD100×360
500
725
?150
4.0×2
3600×1700×1600
3616

4
GZD120×360
500
735
?180
5.5×2
3880×2150×2115?
4909

5
GZD120×420
600
735
?200
5.5×2
4310×2157×2150
5710

6
GZD120×420
600
735
?200
5.5×2
4310×2157×2150
5710

7
GZD120×460
600
735
?250
5.5×2
4593×2157×2200
6817

8
GZD140×500
700
735
?300
8.5×2
5090×2700×2200
9800

9
GZD150×600
800
735
?600
14×2
6278×2350×2460
13399

10
GZD160×600
800
735
?700
14×2
6278×2450×2460
14780The headquarters is located in the new high-tech developed area in Luoyang and cover 100,000m2. The company’s product lines include various series of Vibrating Feeder, Jaw Crusher, Impact Crusher, Cone Crusher, Vertical Impact Crusher, Vertical Complex Crusher, Vibrating Screen, Sand Washer & Washing Apparatus, and Movable Crushing Screening Station etc. The products can be widely used in various fields domestically and internationally such as in building water conservancy and hydroelectric power projects, in high-quality highway construction, in railway construction work, in processing various metallic and non-metallic mineral, in crushing and processing refractory material, in metallurgy and multipurpose utilization engineering and crushing metallurgical slag, etc.
The company has passed the ISO9001-2000 Standard (Quality Assurance Certificate of Quality Management System) since 1998 successively. At present the company possesses many patented techniques. Since 2006 the company has been cooperating with EARTHTECHNICA CO., LTD., Japan and manufacturing the series of ASTRO JAW Crusher and cone crusher, which apply the international leading technology.
There are many professional departments in the company such as the technical research and development centre, international trade centre, before-sale and after-sale services centre, which are ready to offer you the professional, efficient services anytime, anywhere.

?

Related Topics:

Posted in Category1 | 1 Comment »

Double Crusher|Double Toothed Roll Crusher| double duo mill

Thursday, September 11th, 2008

Double Crusher|Double Toothed Roll Crusher| double duo mill
Double Toothed Roll Crusher double duo mill

??Double rool crusher series is disigned to be used in the industrial branches of ore dressing,chemical engineering,cement,builking material and so on for medium hardness and compression strength not greater than 120-150 Mpa.

??The fact without fixed product size say that fine crushing may be changed into medium crushing.

??Main features of the double rool crusher are htgher ratio of needed size ,lower Capacity than that of our impact crusher.

?????????

Double Crusher
Type
Double Crusher
2PG

400×250
Double
Crusher
2PG

610×400
Double
Crusher
2PG

750×500
Double
Crusher
2PG

750×500
Double
Crusher
2PG

750×500
Double
Crusher
2PG

1000×800
Double Crusher
2PG

1200×800
Double
Crusher
2PG

1200×1000

Roll diameter(mm)
400
610
750
770
750
1000
1200
1200

Roll lenghth(mm)
250
400
500
500
500
800
800
1000

Feeding size max(mm)
25-30
35-45
45-70
50
55
75
95
55
50
25-30
30
40

Product size(mm)
2-8
2-10
10-30
5
10
30
50
10
5
5-10
3-9
2-12

Capacity(t/h)
3-15
3-13
13-32
8
17
49
80
17
11
35-70
26-66
15-90

Roll speed(r.m.p)
200
60-100
50
50
50
100
113
122

Power of motor(kw)
11
15×2
22
37
37
2×45
2×37
2×45

Overall dimensions
1430×
980×795
3442×
1602×888
3265×
2530×1445
3265×
2530×1445
3265×
2530×1445
6327×
2990×2047
6276×
2816×2200
7425×
4926×2019

Double Crusher weight
1300
3317
6950
6950
6950
23817
21015
46400The headquarters is located in the new high-tech developed area in Luoyang and cover 100,000m2. The company’s product lines include various series of Vibrating Feeder, Jaw Crusher, Impact Crusher, Cone Crusher, Vertical Impact Crusher, Vertical Complex Crusher, Vibrating Screen, Sand Washer & Washing Apparatus, and Movable Crushing Screening Station etc. The products can be widely used in various fields domestically and internationally such as in building water conservancy and hydroelectric power projects, in high-quality highway construction, in railway construction work, in processing various metallic and non-metallic mineral, in crushing and processing refractory material, in metallurgy and multipurpose utilization engineering and crushing metallurgical slag, etc.
The company has passed the ISO9001-2000 Standard (Quality Assurance Certificate of Quality Management System) since 1998 successively. At present the company possesses many patented techniques. Since 2006 the company has been cooperating with EARTHTECHNICA CO., LTD., Japan and manufacturing the series of ASTRO JAW Crusher and cone crusher, which apply the international leading technology.
There are many professional departments in the company such as the technical research and development centre, international trade centre, before-sale and after-sale services centre, which are ready to offer you the professional, efficient services anytime, anywhere.


Related Topics:

Posted in Category1 | No Comments »

ball mill| ball crusher |MQ Ball mill| ball crusher

Tuesday, September 9th, 2008

ball mill| ball crusher |MQ Ball mill

ball mill| ball crusher |MQ Ball mill| ball crusher

Ball mill is widely used for milling various kind of ores or rocks in metal and non-metal mining and building material industry.ball mill.
Ball mill .The main bearing of the ball mill with the shell diameter 900-2100mm is spherical liner bearing; for the shell diameter 2700mm, the main bearing is completely closed self-aligning 120°bearing with babbit alloy of high lead and low tin with low hardness, underneath laid with cooling copper piping full of water The bearing is of static pressure structure with high and low pressure united oil lubricating system.(ball mill|Ball mill series,MQ Ball mill,MQ Ball mill series.)ball mill.
Ball mill .The ball mill produced by our plant includes wet grid type, dry grid type and overflow type .

ball crusher |Ball mill|MQ Ball mill|MQ Ball mill series

Ball mill . Our mainly products include: 10-500tons/day flotation equipment; dry, wet magnetic dressing equipment, non-pollution physics gold selecting equipment; reselecting equipment, whole-set equipment for coal fluid gold selecting field(desorbing and electrolysis); 2.2-200 thousand tons cement equipment ? Above 60% of Ball mill . the whole-set equipment have adopted the new technology, including: new type stick mill ? high efficiency and energy saving taper ball mill, new style flotation machine, rare-earth alnico compound magnetism new style magnetic dressing machine, KY-2 gold selecting enrichment table, tri-barn high thin tube mill. We also produce equipment according to the users’ request and undertake the technology upgrade for old concentration plant. ball mill.

ball mill Function & Tehnical Datum

Ball
mill Model
Size of
tube
rotate speed
(r/min)
Weight
Of

Ball
(t)
Size ofInput
(mm)
Size of output
(mm)
Capacity
(t/h)
PowerOf motor(
kw)
Ball
mill
Overall size(mm)
Total
weight
(kg)

dia.
length

Ball mill MQYG900×900
900
900
40
0.96
0.075-0.6
0.22-1.0
15
2415×2320
×1745
4570

Ball mill MQYG900×1800
900
1800
37-39
1.92
0.075-0.6
0.37-2.1
22
4700×23202
127
5800

Ball mill MQYG900×2400
900
2400
36
4
0.075-0.6
0.5-2.4
30
5303×2320
×2127
6680

Ball mill MQYG900×3000
900
3000
40
2-2.3
0.074-0.6
0.8-2.5
30
6170×2320
×2127
7200

Ball mill MQYG900×3200
900
3200
40
2-2.3
0.074-0.6
1.2-2.5
30
6370×2320
×2127
7800

Ball mill MQYG1200×1200
1200
1200
31.5
2.4
0.074-0.6
0.2-2.9
30
5320×2850
×2540
11500

Ball mill MQYG1200×2400
1200
2400
31.5
4.8
0.074-0.6
0.4-5.8
30
6520×2850
×2540
13500

Ball mill MQYG1200×4500
1200
4500
30
5.2
0.074-0.6
0.8-6.4
55
8820×3070
×2360
14200

Ball mill MQYG1500×1500
1500
1500
29.2
5
0.074-0.4
1.4-4.5
55
6020×3200
×2700
14000

Ball mill MQYG1500×3000
1500
3000
29.2
16
0.074-0.4
2.8-9.0
95
7800×3200
×2700
17500

Ball mill MQYG2100×2200
2100
2200
23.8
15
0.074-0.8
5.0-12
155
8200×4300
×3800
46900

Ball mill MQYG2100×3000
2100
3000
23.8
20
0.074-0.8
4.0-30
210
8900×4800
×3800
48000

Ball mill MQYG2100×3600
2100
3600
23.8
28
0.074-0.8
5.0-36
210
9500×4800
×3800
50600

Ball mill MQYG2400×2400
2400
2400
20.8-23
20.7
0.074-0.8
7.0-14
210
10000×5000
×4000
47400

Ball mill MQYG2400×3000
2400
3000
20.8-23
25.8
0.074-0.8
8.7-18.5
240
11000×5000
×4000
50000The headquarters is located in the new high-tech developed area in Luoyang and cover 100,000m2. The company’s product lines include various series of Vibrating Feeder, Jaw Crusher, Impact Crusher, Cone Crusher, Vertical Impact Crusher, Vertical Complex Crusher, Vibrating Screen, Sand Washer & Washing Apparatus, and Movable Crushing Screening Station etc. The products can be widely used in various fields domestically and internationally such as in building water conservancy and hydroelectric power projects, in high-quality highway construction, in railway construction work, in processing various metallic and non-metallic mineral, in crushing and processing refractory material, in metallurgy and multipurpose utilization engineering and crushing metallurgical slag, etc.
The company has passed the ISO9001-2000 Standard (Quality Assurance Certificate of Quality Management System) since 1998 successively. At present the company possesses many patented techniques. Since 2006 the company has been cooperating with EARTHTECHNICA CO., LTD., Japan and manufacturing the series of ASTRO JAW Crusher and cone crusher, which apply the international leading technology.
There are many professional departments in the company such as the technical research and development centre, international trade centre, before-sale and after-sale services centre, which are ready to offer you the professional, efficient services anytime, anywhere.The headquarters is located in the new high-tech developed area in Luoyang and cover 100,000m2. The company’s product lines include various series of Vibrating Feeder, Jaw Crusher, Impact Crusher, Cone Crusher, Vertical Impact Crusher, Vertical Complex Crusher, Vibrating Screen, Sand Washer & Washing Apparatus, and Movable Crushing Screening Station etc. The products can be widely used in various fields domestically and internationally such as in building water conservancy and hydroelectric power projects, in high-quality highway construction, in railway construction work, in processing various metallic and non-metallic mineral, in crushing and processing refractory material, in metallurgy and multipurpose utilization engineering and crushing metallurgical slag, etc.
The company has passed the ISO9001-2000 Standard (Quality Assurance Certificate of Quality Management System) since 1998 successively. At present the company possesses many patented techniques. Since 2006 the company has been cooperating with EARTHTECHNICA CO., LTD., Japan and manufacturing the series of ASTRO JAW Crusher and cone crusher, which apply the international leading technology.
There are many professional departments in the company such as the technical research and development centre, international trade centre, before-sale and after-sale services centre, which are ready to offer you the professional, efficient services anytime, anywhere.The headquarters is located in the new high-tech developed area in Luoyang and cover 100,000m2. The company’s product lines include various series of Vibrating Feeder, Jaw Crusher, Impact Crusher, Cone Crusher, Vertical Impact Crusher, Vertical Complex Crusher, Vibrating Screen, Sand Washer & Washing Apparatus, and Movable Crushing Screening Station etc. The products can be widely used in various fields domestically and internationally such as in building water conservancy and hydroelectric power projects, in high-quality highway construction, in railway construction work, in processing various metallic and non-metallic mineral, in crushing and processing refractory material, in metallurgy and multipurpose utilization engineering and crushing metallurgical slag, etc.
The company has passed the ISO9001-2000 Standard (Quality Assurance Certificate of Quality Management System) since 1998 successively. At present the company possesses many patented techniques. Since 2006 the company has been cooperating with EARTHTECHNICA CO., LTD., Japan and manufacturing the series of ASTRO JAW Crusher and cone crusher, which apply the international leading technology.
There are many professional departments in the company such as the technical research and development centre, international trade centre, before-sale and after-sale services centre, which are ready to offer you the professional, efficient services anytime, anywhere.


Related Topics:

Posted in Category1 | No Comments »

PM Multi-level Vertical Pulverizing Mill

Monday, September 8th, 2008

PM Multi-level Vertical Pulverizing Mill
??PM Multi-level Vertical Pulverizing Mill is an optimized design of new type of PM 3-deck vertical pulverizing mill designed and developed by the Company based on the domestic and international pre-crushing technology in combination of the outstanding features for the types of roller crushers, im
PM Multi-level Vertical Pulverizing Mill
??PM Multi-level Vertical Pulverizing Mill is an optimized design of new type of PM 3-deck vertical pulverizing mill designed and developed by the Company based on the domestic and international pre-crushing technology in combination of the outstanding features for the types of roller crushers, impact crushers and conical crushers, which has given a brand-new push of further development towards the stage of pulverizing mill.

Application:
??This Series of product is applicable to crushing brittle materials such as cement clinkers, limestones, admixture, gypsum, pyrites, mineral slag and iron ores etc.

Special features:
1. Power consumption of this product series is only 50% of the ball mill in terms of equal capacity and the price is only one-eighth of the roller press, making the output of the mill doubled;

2. The special jointing clearance of the hammer is easily adjustable and can produce finer particles at the discharge with 80% averagely less than 1 mm, which passes 1mm sieve.

3. Hammers are made of Co-base alloy with super alloy material providing good abrasion, longer service life and what is more adjustable.
4. No screening bars are provided at the bottom, which make the equipment durable, stable operation and dust-proof.

5. This product series is rational in construction, simple in operation, easy in installation and less in occupied space areas.

Major technical data
? Model
Max. Feed Sizes(mm)
Capacity (t/h)
Motor Power(kw)
Average Discharging Particle(mm)
Remarks

PM-40
?100
30-40
90
1
80% can pass 1 mm sieve

PM-60
?120
40-65
132
1
80% can pass 1 mm sieve

PM-80
?130
60-85
160
1
80% can pass 1 mm sieve

PM-100
?140
70-100
200
1
80% can pass 1 mm sieve

PM-130
?150
90-130
250
1
80% can pass 1 mm sieve

PM-150
?150
110-150
280
1
80% can pass 1 mm sieve

PM-200
?150
130-210
355
1The headquarters is located in the new high-tech developed area in Luoyang and cover 100,000m2. The company’s product lines include various series of Vibrating Feeder, Jaw Crusher, Impact Crusher, Cone Crusher, Vertical Impact Crusher, Vertical Complex Crusher, Vibrating Screen, Sand Washer & Washing Apparatus, and Movable Crushing Screening Station etc. The products can be widely used in various fields domestically and internationally such as in building water conservancy and hydroelectric power projects, in high-quality highway construction, in railway construction work, in processing various metallic and non-metallic mineral, in crushing and processing refractory material, in metallurgy and multipurpose utilization engineering and crushing metallurgical slag, etc.
The company has passed the ISO9001-2000 Standard (Quality Assurance Certificate of Quality Management System) since 1998 successively. At present the company possesses many patented techniques. Since 2006 the company has been cooperating with EARTHTECHNICA CO., LTD., Japan and manufacturing the series of ASTRO JAW Crusher and cone crusher, which apply the international leading technology.
There are many professional departments in the company such as the technical research and development centre, international trade centre, before-sale and after-sale services centre, which are ready to offer you the professional, efficient services anytime, anywhere.The headquarters is located in the new high-tech developed area in Luoyang and cover 100,000m2. The company’s product lines include various series of Vibrating Feeder, Jaw Crusher, Impact Crusher, Cone Crusher, Vertical Impact Crusher, Vertical Complex Crusher, Vibrating Screen, Sand Washer & Washing Apparatus, and Movable Crushing Screening Station etc. The products can be widely used in various fields domestically and internationally such as in building water conservancy and hydroelectric power projects, in high-quality highway construction, in railway construction work, in processing various metallic and non-metallic mineral, in crushing and processing refractory material, in metallurgy and multipurpose utilization engineering and crushing metallurgical slag, etc.
The company has passed the ISO9001-2000 Standard (Quality Assurance Certificate of Quality Management System) since 1998 successively. At present the company possesses many patented techniques. Since 2006 the company has been cooperating with EARTHTECHNICA CO., LTD., Japan and manufacturing the series of ASTRO JAW Crusher and cone crusher, which apply the international leading technology.
There are many professional departments in the company such as the technical research and development centre, international trade centre, before-sale and after-sale services centre, which are ready to offer you the professional, efficient services anytime, anywhere.


Related Topics:

Posted in Category1 | 1 Comment »

Double Crusher|Double Toothed Roll Crusher| double duo mill

Sunday, September 7th, 2008

Double Crusher|Double Toothed Roll Crusher| double duo mill
Double Toothed Roll Crusher double duo mill

??Double rool crusher series is disigned to be used in the industrial branches of ore dressing,chemical engineering,cement,builking material and so on for medium hardness and compression strength not greater than 120-150 Mpa.

??The fact without fixed product size say that fine crushing may be changed into medium crushing.

??Main features of the double rool crusher are htgher ratio of needed size ,lower Capacity than that of our impact crusher.

?????????

Double Crusher
Type
Double Crusher
2PG

400×250
Double
Crusher
2PG

610×400
Double
Crusher
2PG

750×500
Double
Crusher
2PG

750×500
Double
Crusher
2PG

750×500
Double
Crusher
2PG

1000×800
Double Crusher
2PG

1200×800
Double
Crusher
2PG

1200×1000

Roll diameter(mm)
400
610
750
770
750
1000
1200
1200

Roll lenghth(mm)
250
400
500
500
500
800
800
1000

Feeding size max(mm)
25-30
35-45
45-70
50
55
75
95
55
50
25-30
30
40

Product size(mm)
2-8
2-10
10-30
5
10
30
50
10
5
5-10
3-9
2-12

Capacity(t/h)
3-15
3-13
13-32
8
17
49
80
17
11
35-70
26-66
15-90

Roll speed(r.m.p)
200
60-100
50
50
50
100
113
122

Power of motor(kw)
11
15×2
22
37
37
2×45
2×37
2×45

Overall dimensions
1430×
980×795
3442×
1602×888
3265×
2530×1445
3265×
2530×1445
3265×
2530×1445
6327×
2990×2047
6276×
2816×2200
7425×
4926×2019

Double Crusher weight
1300
3317
6950
6950
6950
23817
21015
46400The headquarters is located in the new high-tech developed area in Luoyang and cover 100,000m2. The company’s product lines include various series of Vibrating Feeder, Jaw Crusher, Impact Crusher, Cone Crusher, Vertical Impact Crusher, Vertical Complex Crusher, Vibrating Screen, Sand Washer & Washing Apparatus, and Movable Crushing Screening Station etc. The products can be widely used in various fields domestically and internationally such as in building water conservancy and hydroelectric power projects, in high-quality highway construction, in railway construction work, in processing various metallic and non-metallic mineral, in crushing and processing refractory material, in metallurgy and multipurpose utilization engineering and crushing metallurgical slag, etc.
The company has passed the ISO9001-2000 Standard (Quality Assurance Certificate of Quality Management System) since 1998 successively. At present the company possesses many patented techniques. Since 2006 the company has been cooperating with EARTHTECHNICA CO., LTD., Japan and manufacturing the series of ASTRO JAW Crusher and cone crusher, which apply the international leading technology.
There are many professional departments in the company such as the technical research and development centre, international trade centre, before-sale and after-sale services centre, which are ready to offer you the professional, efficient services anytime, anywhere.


Related Topics:

Posted in Category1 | No Comments »

Hammer Crusher|Hammer Crusher series| impact breaker| crushing press | crushing mill | crushing appliance | ballast crusher

Friday, September 5th, 2008

Hammer Crusher|Hammer Crusher series| impact breaker| crushing press | crushing mill | crushing appliance | ballast crusher

SINGLE-STAGE HAMMER CRUSHER SERIES

The Single -Stage Hammer Crusher are suitable used to crushing ordinary fragile ores of the compressive strength no more than 200Mpa, such as limestone, gypsum, coal, marl, sand-shale etc. This series product features of high crushing ratio, even product graininess, simple construction, reliable operation, easily maintenance, economical running cost etc., so are widely used .

Hammer Crusher Models
Hammer Crusher Max. feed
size(mm)

Hammer Crusher Rotor
dia. mm

Hammer Crusher Rotor
length
mm

Hammer Crusher Product
Size
(Residue 15%)
Hammer Crusher Capacity t/h
Hammer Crusher Power of motor kW

Weight
(Excluding electric motor) (t)

Hammer Crusher PCF-1412
600×600×900
1420
1200
Residue 25
80-130
130-190
23.5

Hammer Crusher PCF-1616
800×800×1000
1650
1630
Residue 25
130-240
250-350
43.3

Hammer Crusher PCF-1817
900×900×1200
1850
1730
Residue 25
240-350
400-560
70

Hammer Crusher PCF-2018
1000×1000×1000
2020
1802
Residue 25
350-450
630-710
89

Hammer Crusher PCF-2022
1000×1000×1500
2020
2230
Residue 25
400-600
630-800
128

IMPACT-HAMMER CRUSHER

This impact-hammer crusher can reduce the 600~1800mm feed material into size less than 25~20mm in one stage. It is used mainly for crushing brittle, medium hare and less moisture content materials (e.g. limestone) in various fields such as cement, building-material, mining, chemical industry etc. The compressive strength of the materials does not exceed 140Mpa.

The duality of the crusher is always the best among the same trade at home, with a large reduction ratio, low power requirement and small occupy area.

Hammer Crusher Models
Max. edge length of feeding(mm)
Discharge
opening
width (mm)
Capacity
(t/h)
Motor
rating(kW)
Weight(excluding electric motor) (kg)

Hammer Crusher PFC-1609
600
25
50-70
110
23000

Hammer Crusher PFC-1612
850
25
100-140
240
29000

Hammer Crusher PFC-2014
1200
25
150-200
310
44000

Hammer Crusher PFC-2017
1200
25
200-250
380
51000

Hammer Crusher PFC-2519
1500
25
250-450
600
90000

Hammer Crusher PFC-2724
1800
25
600-800
1100
127000

Fine Grained Hammer Crusher

This series of hammer crushers is suitable for crushing various britte materials such as coal salt, chalk, plaster stone alumstone, bricktile limestone and cement grog etc whose compressive resistance does not exceed 100 Mpa and the moisture content should not be greater than 15% and the size of discharge is

Hammer Crusher Models
Max. size Of feed Material
Size of Discharge
(mm)
Crushing capacity
(t/h)
Motor Rating(kW)
Weight
(t)

Hammer Crusher PCX-83
80
5
10-15
37
3.1

Hammer Crusher PCX-84
80
5
15-20
37
3.5

Hammer Crusher PCX-86
100
5
15-25
45
3.7

Hammer Crusher PCX-88
100
5
25-35
75
4

Hammer Crusher PCX-0810
100
5
30-40
90
5.1

RING HAMMER CRUSHER SERIES WORKING PRINCIPLE

This series of machine is a punching rotor type crushing machine with ring-hammer on the rotor. First the material fed to the crushing space is crashed by punching force of the ring-hammer rotating at high speed. mean while the material crushed gets kinetic energy from the ring-hammer and is punched forward the crushing board, then it gets punched the second time and fall to the sieve plate. The material is cut, squeezed and crushed into pieces by the force of ring-hammer and their own rubbing and get out of the machine will be sent to the metal collector and get cleared off periodically.
APPLICATION
This series of ring-hammer crushers is suitable for crushing various materials of brittleness such as coal, gangue, coke, slay, shale and loose lime stone etc. Whose compressive resistance does not exceed 10Mpa and the surface moisture content should not be greater than 8%.

Hammer Crusher Models
Max. size Of feed Material
Size of Discharge
(mm)
Crushing capacity
(t/h)
Hammer Crusher Motor Rating(kW)
Weight(excluding electric motor) (kg)

Hammer Crusher PCH-42
200
3-30
8-12
5.5
800

Hammer Crusher PCH-44
200
3-30
16-25
11
1050

Hammer Crusher PCH-64
200
3-30
22-33
18.5
1430

Hammer Crusher PCH-66
200
3-30
30-60
30
1770

Hammer Crusher PCH-88
200
3-30
75-105
45
3600

Hammer Crusher PCH-1010
300
3-30
200-245
110
6100

Hammer Crusher PCH-1016
300
3-30
400-500
220
9740
The headquarters is located in the new high-tech developed area in Luoyang and cover 100,000m2. The company’s product lines include various series of Vibrating Feeder, Jaw Crusher, Impact Crusher, Cone Crusher, Vertical Impact Crusher, Vertical Complex Crusher, Vibrating Screen, Sand Washer & Washing Apparatus, and Movable Crushing Screening Station etc. The products can be widely used in various fields domestically and internationally such as in building water conservancy and hydroelectric power projects, in high-quality highway construction, in railway construction work, in processing various metallic and non-metallic mineral, in crushing and processing refractory material, in metallurgy and multipurpose utilization engineering and crushing metallurgical slag, etc.
The company has passed the ISO9001-2000 Standard (Quality Assurance Certificate of Quality Management System) since 1998 successively. At present the company possesses many patented techniques. Since 2006 the company has been cooperating with EARTHTECHNICA CO., LTD., Japan and manufacturing the series of ASTRO JAW Crusher and cone crusher, which apply the international leading technology.
There are many professional departments in the company such as the technical research and development centre, international trade centre, before-sale and after-sale services centre, which are ready to offer you the professional, efficient services anytime, anywhere.The headquarters is located in the new high-tech developed area in Luoyang and cover 100,000m2. The company’s product lines include various series of Vibrating Feeder, Jaw Crusher, Impact Crusher, Cone Crusher, Vertical Impact Crusher, Vertical Complex Crusher, Vibrating Screen, Sand Washer & Washing Apparatus, and Movable Crushing Screening Station etc. The products can be widely used in various fields domestically and internationally such as in building water conservancy and hydroelectric power projects, in high-quality highway construction, in railway construction work, in processing various metallic and non-metallic mineral, in crushing and processing refractory material, in metallurgy and multipurpose utilization engineering and crushing metallurgical slag, etc.
The company has passed the ISO9001-2000 Standard (Quality Assurance Certificate of Quality Management System) since 1998 successively. At present the company possesses many patented techniques. Since 2006 the company has been cooperating with EARTHTECHNICA CO., LTD., Japan and manufacturing the series of ASTRO JAW Crusher and cone crusher, which apply the international leading technology.
There are many professional departments in the company such as the technical research and development centre, international trade centre, before-sale and after-sale services centre, which are ready to offer you the professional, efficient services anytime, anywhere.


Related Topics:

Posted in Category1 | No Comments »

Hammer Crusher|Hammer Crusher series| impact breaker| crushing press | crushing mill | crushing appliance | ballast crusher

Wednesday, September 3rd, 2008

Hammer Crusher|Hammer Crusher series| impact breaker| crushing press | crushing mill | crushing appliance | ballast crusher

SINGLE-STAGE HAMMER CRUSHER SERIES

The Single -Stage Hammer Crusher are suitable used to crushing ordinary fragile ores of the compressive strength no more than 200Mpa, such as limestone, gypsum, coal, marl, sand-shale etc. This series product features of high crushing ratio, even product graininess, simple construction, reliable operation, easily maintenance, economical running cost etc., so are widely used .

Hammer Crusher Models
Hammer Crusher Max. feed
size(mm)

Hammer Crusher Rotor
dia. mm

Hammer Crusher Rotor
length
mm

Hammer Crusher Product
Size
(Residue 15%)
Hammer Crusher Capacity t/h
Hammer Crusher Power of motor kW

Weight
(Excluding electric motor) (t)

Hammer Crusher PCF-1412
600×600×900
1420
1200
Residue 25
80-130
130-190
23.5

Hammer Crusher PCF-1616
800×800×1000
1650
1630
Residue 25
130-240
250-350
43.3

Hammer Crusher PCF-1817
900×900×1200
1850
1730
Residue 25
240-350
400-560
70

Hammer Crusher PCF-2018
1000×1000×1000
2020
1802
Residue 25
350-450
630-710
89

Hammer Crusher PCF-2022
1000×1000×1500
2020
2230
Residue 25
400-600
630-800
128

IMPACT-HAMMER CRUSHER

This impact-hammer crusher can reduce the 600~1800mm feed material into size less than 25~20mm in one stage. It is used mainly for crushing brittle, medium hare and less moisture content materials (e.g. limestone) in various fields such as cement, building-material, mining, chemical industry etc. The compressive strength of the materials does not exceed 140Mpa.

The duality of the crusher is always the best among the same trade at home, with a large reduction ratio, low power requirement and small occupy area.

Hammer Crusher Models
Max. edge length of feeding(mm)
Discharge
opening
width (mm)
Capacity
(t/h)
Motor
rating(kW)
Weight(excluding electric motor) (kg)

Hammer Crusher PFC-1609
600
25
50-70
110
23000

Hammer Crusher PFC-1612
850
25
100-140
240
29000

Hammer Crusher PFC-2014
1200
25
150-200
310
44000

Hammer Crusher PFC-2017
1200
25
200-250
380
51000

Hammer Crusher PFC-2519
1500
25
250-450
600
90000

Hammer Crusher PFC-2724
1800
25
600-800
1100
127000

Fine Grained Hammer Crusher

This series of hammer crushers is suitable for crushing various britte materials such as coal salt, chalk, plaster stone alumstone, bricktile limestone and cement grog etc whose compressive resistance does not exceed 100 Mpa and the moisture content should not be greater than 15% and the size of discharge is

Hammer Crusher Models
Max. size Of feed Material
Size of Discharge
(mm)
Crushing capacity
(t/h)
Motor Rating(kW)
Weight
(t)

Hammer Crusher PCX-83
80
5
10-15
37
3.1

Hammer Crusher PCX-84
80
5
15-20
37
3.5

Hammer Crusher PCX-86
100
5
15-25
45
3.7

Hammer Crusher PCX-88
100
5
25-35
75
4

Hammer Crusher PCX-0810
100
5
30-40
90
5.1

RING HAMMER CRUSHER SERIES WORKING PRINCIPLE

This series of machine is a punching rotor type crushing machine with ring-hammer on the rotor. First the material fed to the crushing space is crashed by punching force of the ring-hammer rotating at high speed. mean while the material crushed gets kinetic energy from the ring-hammer and is punched forward the crushing board, then it gets punched the second time and fall to the sieve plate. The material is cut, squeezed and crushed into pieces by the force of ring-hammer and their own rubbing and get out of the machine will be sent to the metal collector and get cleared off periodically.
APPLICATION
This series of ring-hammer crushers is suitable for crushing various materials of brittleness such as coal, gangue, coke, slay, shale and loose lime stone etc. Whose compressive resistance does not exceed 10Mpa and the surface moisture content should not be greater than 8%.

Hammer Crusher Models
Max. size Of feed Material
Size of Discharge
(mm)
Crushing capacity
(t/h)
Hammer Crusher Motor Rating(kW)
Weight(excluding electric motor) (kg)

Hammer Crusher PCH-42
200
3-30
8-12
5.5
800

Hammer Crusher PCH-44
200
3-30
16-25
11
1050

Hammer Crusher PCH-64
200
3-30
22-33
18.5
1430

Hammer Crusher PCH-66
200
3-30
30-60
30
1770

Hammer Crusher PCH-88
200
3-30
75-105
45
3600

Hammer Crusher PCH-1010
300
3-30
200-245
110
6100

Hammer Crusher PCH-1016
300
3-30
400-500
220
9740
The headquarters is located in the new high-tech developed area in Luoyang and cover 100,000m2. The company’s product lines include various series of Vibrating Feeder, Jaw Crusher, Impact Crusher, Cone Crusher, Vertical Impact Crusher, Vertical Complex Crusher, Vibrating Screen, Sand Washer & Washing Apparatus, and Movable Crushing Screening Station etc. The products can be widely used in various fields domestically and internationally such as in building water conservancy and hydroelectric power projects, in high-quality highway construction, in railway construction work, in processing various metallic and non-metallic mineral, in crushing and processing refractory material, in metallurgy and multipurpose utilization engineering and crushing metallurgical slag, etc.
The company has passed the ISO9001-2000 Standard (Quality Assurance Certificate of Quality Management System) since 1998 successively. At present the company possesses many patented techniques. Since 2006 the company has been cooperating with EARTHTECHNICA CO., LTD., Japan and manufacturing the series of ASTRO JAW Crusher and cone crusher, which apply the international leading technology.
There are many professional departments in the company such as the technical research and development centre, international trade centre, before-sale and after-sale services centre, which are ready to offer you the professional, efficient services anytime, anywhere.The headquarters is located in the new high-tech developed area in Luoyang and cover 100,000m2. The company’s product lines include various series of Vibrating Feeder, Jaw Crusher, Impact Crusher, Cone Crusher, Vertical Impact Crusher, Vertical Complex Crusher, Vibrating Screen, Sand Washer & Washing Apparatus, and Movable Crushing Screening Station etc. The products can be widely used in various fields domestically and internationally such as in building water conservancy and hydroelectric power projects, in high-quality highway construction, in railway construction work, in processing various metallic and non-metallic mineral, in crushing and processing refractory material, in metallurgy and multipurpose utilization engineering and crushing metallurgical slag, etc.
The company has passed the ISO9001-2000 Standard (Quality Assurance Certificate of Quality Management System) since 1998 successively. At present the company possesses many patented techniques. Since 2006 the company has been cooperating with EARTHTECHNICA CO., LTD., Japan and manufacturing the series of ASTRO JAW Crusher and cone crusher, which apply the international leading technology.
There are many professional departments in the company such as the technical research and development centre, international trade centre, before-sale and after-sale services centre, which are ready to offer you the professional, efficient services anytime, anywhere.


Related Topics:

Posted in Category1 | No Comments »

PEY Hydraulic Protective Jaw Crusher

Monday, September 1st, 2008

PEY Hydraulic Protective Jaw Crusher

This series products are applicable for crushing various materials with compression strength less than 320Mpa in the fields of metallurgy, mine, building materials ,etc. Among them the PEY series Hydraulic Jaw Crusher has protective function. Therefore it effectively solve the problem of ‘Steel-Clutch’of the materials, and is suitable in crushing metallurgy residues such as slag, etc.The headquarters is located in the new high-tech developed area in Luoyang and cover 100,000m2. The company’s product lines include various series of Vibrating Feeder, Jaw Crusher, Impact Crusher, Cone Crusher, Vertical Impact Crusher, Vertical Complex Crusher, Vibrating Screen, Sand Washer & Washing Apparatus, and Movable Crushing Screening Station etc. The products can be widely used in various fields domestically and internationally such as in building water conservancy and hydroelectric power projects, in high-quality highway construction, in railway construction work, in processing various metallic and non-metallic mineral, in crushing and processing refractory material, in metallurgy and multipurpose utilization engineering and crushing metallurgical slag, etc.
The company has passed the ISO9001-2000 Standard (Quality Assurance Certificate of Quality Management System) since 1998 successively. At present the company possesses many patented techniques. Since 2006 the company has been cooperating with EARTHTECHNICA CO., LTD., Japan and manufacturing the series of ASTRO JAW Crusher and cone crusher, which apply the international leading technology.
There are many professional departments in the company such as the technical research and development centre, international trade centre, before-sale and after-sale services centre, which are ready to offer you the professional, efficient services anytime, anywhere.
The headquarters is located in the new high-tech developed area in Luoyang and cover 100,000m2. The company’s product lines include various series of Vibrating Feeder, Jaw Crusher, Impact Crusher, Cone Crusher, Vertical Impact Crusher, Vertical Complex Crusher, Vibrating Screen, Sand Washer & Washing Apparatus, and Movable Crushing Screening Station etc. The products can be widely used in various fields domestically and internationally such as in building water conservancy and hydroelectric power projects, in high-quality highway construction, in railway construction work, in processing various metallic and non-metallic mineral, in crushing and processing refractory material, in metallurgy and multipurpose utilization engineering and crushing metallurgical slag, etc.
The company has passed the ISO9001-2000 Standard (Quality Assurance Certificate of Quality Management System) since 1998 successively. At present the company possesses many patented techniques. Since 2006 the company has been cooperating with EARTHTECHNICA CO., LTD., Japan and manufacturing the series of ASTRO JAW Crusher and cone crusher, which apply the international leading technology.
There are many professional departments in the company such as the technical research and development centre, international trade centre, before-sale and after-sale services centre, which are ready to offer you the professional, efficient services anytime, anywhere.


Related Topics:

Posted in Category1 | No Comments »

« Previous Entries
Next Entries »